Nema 23 (57mm) matoorka stepper-ka isku-dhafan, bipolar, 4-lead, boolal hogaanka ACME ah, buuq yar, cimri dheer, waxqabad sare.
Nema 23 (57mm) matoorka stepper-ka isku-dhafan, bipolar, 4-lead, boolal hogaanka ACME ah, buuq yar, cimri dheer, waxqabad sare.
Matoorkan stepper-ka isku-dhafan ee 57mm wuxuu ku diyaar yahay saddex nooc: dhidibka dibadda ku socda, dhidibka dhex mara, iyo dhidibka go'an. Waxaad dooran kartaa iyadoo loo eegayo baahiyahaaga gaarka ah.
Matoorkan waxaa laga heli karaa cabbirro 20mm, 28mm, 35mm, 42mm, 57mm, 86mm
Dhererka tallaabooyinka, 0.001524mm ~ 0.127mm
Waxqabadka: Riixitaan ugu badan ilaa 240kg, kor u kaca heerkulka hooseeya, gariir hoose, buuq yar, cimri dheer (ilaa 5 milyan oo wareeg), saxnaan meelayn sare (ilaa ± 0.01 mm)
Sharaxaadaha
| Magaca Badeecada | Matoorada stepper-ka isku-dhafan ee 57mm |
| Moodel | VSM57HSM |
| Nooca | matoorrada stepper-ka isku-dhafan |
| Xagasha Tallaabo | 1.8° |
| Danab (V) | 2.3 / 3 / 3.1 / 3.8 |
| Hadda (A) | 3/4 |
| Iska caabinta (Ohms) | 0.75 / 1 / 0.78 / 0.95 |
| Soo-qaadista (mH) | 2.5 / 4.5 / 3.3 / 4.5 |
| Fiilooyinka Raadhka | 4 |
| Dhererka Matoorka (mm) | 45 / 55 / 65 / 75 |
| Heerkulka Deegaanka | -20℃ ~ +50℃ |
| Kor u kaca Heerkulka | Ugu badnaan 80K. |
| Xoogga Dielectric | 1mA Ugu badnaan @ 500V, 1KHz, 1Sec. |
| Iska caabinta dahaarka | 100MΩ Ugu yaraan @500Vdc |
Shahaadooyinka
Halbeegyada Korontada:
| Cabbirka Matoorka | Danab /Wajiga (V) | Hadda /Wajiga (A) | Iska caabin /Wajiga (Ω) | Inductance /Wajiga (mH) | Tirada Fiilooyinka Raadhka | Rotor Inertia (g.cm)2) | Miisaanka Matoorka (g) | Dhererka Mootada L (mm) |
| 57 | 2.3 | 3 | 0.75 | 2.5 | 4 | 150 | 580 | 45 |
| 57 | 3 | 3 | 1 | 4.5 | 4 | 300 | 710 | 55 |
| 57 | 3.1 | 4 | 0.78 | 3.3 | 4 | 400 | 880 | 65 |
| 57 | 3.8 | 4 | 0.95 | 4.5 | 4 | 480 | 950 | 75 |
Tilmaamaha boolal-birta iyo xuduudaha waxqabadka
| Dhexroorka (mm) | Hoggaanka (mm) | Tallaabo (mm) | Dami xoogga is-xiritaanka (N) |
| 9.525 | 1.27 | 0.00635 | 800 |
| 9.525 | 2.54 | 0.0127 | 300 |
| 9.525 | 5.08 | 0.0254 | 90 |
| 9.525 | 10.16 | 0.0508 | 30 |
| 9.525 | 25.4 | 0.127 | 6 |
Fiiro gaar ah: Wixii faahfaahin dheeraad ah oo ku saabsan boolal rasaas ah, fadlan nala soo xiriir.
Sawirka dulmar ee matoorka dibadda ee caadiga ah ee VSM57HSM:
Qoraalo:
Dhererka boolal-ka Lead waa la habeyn karaa
Mashiinka la habeeyey waa mid la isticmaali karo dhammaadka boolalka rasaasta
Matoorada stepper-ka isku-dhafan ee 57mm, sawir guud oo matoorka maxaabiista ah:
Qoraalo:
Mashiinka la habeeyey waa mid la isticmaali karo dhammaadka boolalka rasaasta
| Stroke S (mm) | Cabbirka A (mm) | Cabbirka B (mm) | |||
| L = 45 | L = 55 | L = 65 | L = 75 | ||
| 12.7 | 24.1 | 1.1 | 0 | 0 | 0 |
| 19.1 | 30.5 | 7.5 | 0 | 0 | 0 |
| 25.4 | 36.8 | 13.8 | 4.8 | 0 | 0 |
| 31.8 | 43.2 | 20.2 | 11.2 | 0.2 | 0 |
| 38.1 | 49.5 | 26.5 | 17.5 | 6.5 | 0 |
| 50.8 | 62.2 | 39.2 | 30.2 | 19.2 | 9.1 |
| 63.5 | 74.9 | 51.9 | 42.9 | 31.9 | 21.9 |
Sawirka Matoorka Stepper-ka ee Heerka Caadiga ah ee 57mm
Qoraalo:
Dhererka boolal-ka Lead waa la habeyn karaa
Mashiinka la habeeyey waa mid la isticmaali karo dhammaadka boolalka rasaasta
Xawaaraha iyo qalooca riixitaanka:
57 taxane ah oo 45mm dherer matoor ah oo laba-jibbaaran oo loo yaqaan 'Chopper Drive'
100% soo noqnoqoshada garaaca hadda jira iyo qalooca riixitaanka (boolal rasaas ah Φ9.525mm)
57 taxane ah oo 55mm dherer matoor ah oo laba-jibbaaran oo loo yaqaan 'Chopper'
100% soo noqnoqoshada garaaca hadda jira iyo qalooca riixitaanka (boolal rasaas ah Φ9.525mm)
| Rasaasta (mm) | Xawaaraha toosan (mm/s) | ||||||||
| 1.27 | 1.27 | 2.54 | 3.81 | 5.08 | 6.35 | 7.62 | 8.89 | 10.16 | 11.43 |
| 2.54 | 2.54 | 5.08 | 7.62 | 10.16 | 12.7 | 15.24 | 17.78 | 20.32 | 22.86 |
| 5.08 | 5.08 | 10.16 | 15.24 | 20.32 | 25.4 | 30.48 | 35.56 | 40.64 | 45.72 |
| 10.16 | 10.16 | 20.32 | 30.48 | 40.64 | 50.8 | 60.96 | 71.12 | 81.28 | 91.44 |
| 25.4 | 25.4 | 50.8 | 76.2 | 101.6 | 127 | 152.4 | 711.8 | 203.2 | 228.6 |
Xaaladda tijaabada:
Wadista chopper-ka, ma jirto jaranjaro, kala badh tallaabo yar, danab wadista 40V
57 taxane ah oo 65mm dherer matoor ah oo laba-jibbaaran oo loo yaqaan 'Chopper Drive'
100% soo noqnoqoshada garaaca hadda jira iyo qalooca riixitaanka (boolal rasaas ah Φ9.525mm)
57 taxane ah oo 75mm dherer matoor ah oo laba-jibbaaran oo loo yaqaan 'Chopper'
100% soo noqnoqoshada garaaca hadda jira iyo qalooca riixitaanka (boolal rasaas ah Φ9.525mm)
| Rasaasta (mm) | Xawaaraha toosan (mm/s) | ||||||||
| 1.27 | 1.27 | 2.54 | 3.81 | 5.08 | 6.35 | 7.62 | 8.89 | 10.16 | 11.43 |
| 2.54 | 2.54 | 5.08 | 7.62 | 10.16 | 12.7 | 15.24 | 17.78 | 20.32 | 22.86 |
| 5.08 | 5.08 | 10.16 | 15.24 | 20.32 | 25.4 | 30.48 | 35.56 | 40.64 | 45.72 |
| 10.16 | 10.16 | 20.32 | 30.48 | 40.64 | 50.8 | 60.96 | 71.12 | 81.28 | 91.44 |
| 25.4 | 25.4 | 50.8 | 76.2 | 101.6 | 127 | 152.4 | 711.8 | 203.2 | 228.6 |
Xaaladda tijaabada:
Wadista chopper-ka, ma jirto jaranjaro, kala badh tallaabo yar, danab wadista 40V
Meelaha la adeegsado
Daabacaadda 3D:Matoorada stepper-ka isku-dhafan ee 57mm ayaa si weyn loogu isticmaalaa daabacayaasha 3D si loo xakameeyo booska iyo dhaqdhaqaaqa madaxa daabacaadda.
Qalabka Mashiinka CNC:Qalabka mashiinka Xakamaynta Lambarka Kombuyuutarka (CNC), matoorrada stepper-ka isku-dhafan ee 57mm ayaa loo isticmaalaa in lagu xakameeyo dhaqdhaqaaqa qalabka jarista ee hawlgallada saxda ah ee mashiinka.
Qalabka otomaatiga ah:Matoorada stepper-ka isku-dhafan ee 57mm waxaa loo isticmaali karaa qalab kala duwan oo otomaatig ah, sida mashiinnada baakadaha otomaatiga ah, nidaamyada kala-soocidda otomaatiga ah, khadadka isu-imaatinka otomaatiga ah, iwm., si loo xakameeyo dhaqdhaqaaqa iyo booska.
Mashiinka Dharka:Warshadaha dharka, matoorrada stepper-ka isku-dhafan ee 57mm ayaa loo isticmaali karaa in lagu xakameeyo mashiinnada wareegidda, qalabka wax lagu dhaqo iyo qalabka kale si loo hubiyo saxnaanta iyo xasilloonida habka dharka.
Qalabka caafimaadka:Matoorada stepper-ka isku-dhafan ee 57mm ayaa si weyn loogu isticmaalaa qalabka caafimaadka sida bamka sirinjyada caafimaadka, robot-yada caafimaadka, qalabka sawir-qaadista, iwm. si loo xakameeyo booska saxda ah iyo xakamaynta dhaqdhaqaaqa.
Robot-yada:Matoorada stepper-ka isku-dhafan ee 57mm waxaa loo isticmaalaa codsiyo kala duwan oo robotics ah, oo ay ku jiraan robotyada warshadaha, robotyada adeegga, robotyada iskaashiga ah, iwm., si loo sameeyo dhaqdhaqaaq sax ah iyo wax-ka-beddel.
Nidaamyada Kaydinta ee Otomaatigga ah:Nidaamyada bakhaarada otomaatiga ah iyo saadka, matoorrada stepper-ka isku-dhafan ee 57mm ayaa loo isticmaali karaa in lagu xakameeyo suunka gudbiyaha, wiishashka, wiishashka stacker-ka iyo qalabka kale si loo gaaro meelaynta saxda ah iyo maaraynta alaabta.
Kuwani waa qaar ka mid ah codsiyada caadiga ah ee matoorrada stepper-ka isku-dhafan ee 57mm, run ahaantiina, si weyn ayaa loogu isticmaalaa meelo kale oo badan, oo ay ku jiraan qalabka daabacaadda, nidaamyada amniga, qalabka saxda ah, iwm.
Faa'iidada
Saamiga awoodda-ilaa-cabbirka sare:Iyadoo ay yar yihiin cabbirkooda, matoorrada stepper-ka isku-dhafan ee 57mm waxay keeni karaan wax soo saar xoog badan. Tani waxay ka dhigaysaa kuwo ku habboon codsiyada meelaha boosku xaddidan yahay, laakiin loo baahan yahay xoog badan.
Xakamaynta wareegga furan:Matoorada stepper-ka isku dhafan waxay ku shaqeyn karaan nidaamka xakamaynta wareegga furan, taasoo la macno ah inaysan u baahnayn aaladaha jawaab celinta booska sida kuwa wax lagu qoro. Tani waxay fududeyneysaa nidaamka xakamaynta waxayna yareyneysaa kharashyada guud.
Meelaynta saxda ah:Matoorada stepper-ka isku-dhafan waxay bixiyaan awoodo meelayn sax ah sababtoo ah xallinta tallaabooyinka ay ku jiraan. Waxay ku dhaqaaqi karaan koror yar, taasoo u oggolaanaysa meelayn sax ah iyo ku celcelin.
Hawlgal siman:Matoorada stepper-ka isku dhafan waxay gaari karaan hawlgal siman, gaar ahaan marka lagu wado farsamooyinka microstepping-ka. Microstepping-ku wuxuu tallaabo kasta u qaybiyaa tallaabooyin yaryar, taasoo keenta dhaqdhaqaaq siman iyo gariir yar.
Waqtiga jawaabta degdega ah:Matoorada stepper-ka isku-dhafan waxay leeyihiin waqtiyo jawaab celin degdeg ah, taasoo suurtogalinaysa dardargelin degdeg ah iyo hoos u dhac. Astaantan ayaa faa'iido u leh codsiyada u baahan dhaqdhaqaaqyo firfircoon oo firfircoon.
Kalsooni sare iyo cimri dherer:Matoorada stepper-ka isku dhafan waxaa loo yaqaanaa adkeysigooda iyo isku halleyntooda. Waxay leeyihiin cimri dheer oo shaqo, shuruudo dayactir oo hooseeya, waxayna u adkeysan karaan xaaladaha shaqada ee adag.
Xal kharash-ool ah:Marka la barbardhigo teknoolojiyada kale ee xakamaynta dhaqdhaqaaqa sida matoorrada servo, matoorrada stepper-ka isku-dhafan guud ahaan waxay bixiyaan xal kharash-ool ah. Waxay bixiyaan dheelitir wanaagsan oo u dhexeeya waxqabadka iyo qiimaha la awoodi karo.
Isdhexgal fudud:Matoorada stepper-ka isku dhafan ayaa si ballaaran loo heli karaa waxayna la jaan qaadi karaan nidaamyada kala duwan ee elektaroonigga wadista iyo nidaamyada xakamaynta. Si fudud ayaa loogu dari karaa noocyo kala duwan oo mashiinno iyo qalab otomaatig ah.
Waxtarka tamarta:Matoorada stepper-ka isku dhafan waxay isticmaalaan korontada oo keliya marka ay dhaqaaqaan, taasoo ka dhigaysa kuwo tamar-hufan. Marka ay taagan yihiin, uma baahna tamar joogto ah, taasoo gacan ka geysanaysa keydinta tamarta guud.
Shuruudaha Xulashada Matoorka:
► Jihada dhaqdhaqaaqa/kor u qaadista
► Shuruudaha Xamuulka
► Shuruudaha Stroke
► Shuruudaha mashiinka dhammeeya
► Shuruudaha Saxnaanta
► Shuruudaha Jawaab celinta Encoder-ka
► Shuruudaha Hagaajinta Gacanta
► Shuruudaha Deegaanka
Aqoon-is-weydaarsi wax soo saar
Noo soo dir fariintaada:
Qaybaha alaabta
-
Matoorka stepper-ka isku-dhafan ee Nema 14 (35mm), laba-cirifood, 4...
-
Nema 34 (86mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...
-
Nema 17 (42mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...
-
Nema 8 (20mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4-...
-
Nema 11 (28mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...