Nema 11 (28mm) matoorka stepper-ka isku-dhafan, bipolar, 4-lead, boolal hogaanka ACME ah, buuq yar, cimri dheer, waxqabad sare.
Nema 11 (28mm) matoorka stepper-ka isku-dhafan, bipolar, 4-lead, boolal hogaanka ACME ah, buuq yar, cimri dheer, waxqabad sare.
Matoorkan stepper-ka isku-dhafan ee 28mm wuxuu ku diyaar yahay saddex nooc: dhidibka dibadda lagu wado, dhidibka dhex mara, iyo dhidibka go'an. Waxaad dooran kartaa iyadoo loo eegayo baahiyahaaga gaarka ah.
Riixitaan ugu badan ilaa 240kg, kor u kaca heerkulka hooseeya, gariir hoose, buuq yar, cimri dheer (ilaa 5 milyan oo wareeg), iyo saxnaanta booska sare (ilaa ± 0.01 mm)
Sawirka dulmar ee matoorka dibadda ee caadiga ah ee VSM28HSM:
Qoraalo:
Dhererka boolal-ka Lead waa la habeyn karaa
Mashiinka la habeeyey waa mid la isticmaali karo dhammaadka boolalka rasaasta
Sharaxaadaha
| Magaca Badeecada | Matoorada stepper-ka isku-dhafan ee 20mm ee dibadda ku shaqeeya |
| Moodel | VSM20HSM |
| Nooca | matoorrada stepper-ka isku-dhafan |
| Xagasha Tallaabo | 1.8° |
| Danab (V) | 2.5 / 6.3 |
| Hadda (A) | 0.5 |
| Iska caabinta (Ohms) | 5.1 / 12.5 |
| Soo-qaadista (mH) | 1.5 / 4.5 |
| Fiilooyinka Raadhka | 4 |
| Haynta Xuddunta (Nm) | 0.02 / 0.04 |
| Dhererka Matoorka (mm) | 30/42 |
| Heerkulka Deegaanka | -20℃ ~ +50℃ |
| Kor u kaca Heerkulka | Ugu badnaan 80K. |
| Xoogga Dielectric | 1mA Ugu badnaan @ 500V, 1KHz, 1Sec. |
| Iska caabinta dahaarka | 100MΩ Ugu yaraan @500Vdc |
Shahaadooyinka
Halbeegyada Korontada:
| Cabbirka Matoorka | Danab/ Wejiga (V) | Hadda/ Wejiga (A) | Iska caabin/ Wejiga (Ω) | Inductance/ Wejiga (mH) | Tirada Fiilooyinka Raadhka | Rotor Inertia (g.cm)2) | Haynta wareegga (Nm) | Dhererka Mootada L (mm) |
| 20 | 2.5 | 0.5 | 5.1 | 1.5 | 4 | 2 | 0.02 | 30 |
| 20 | 6.3 | 0.5 | 12.5 | 4.5 | 4 | 3 | 0.04 | 42 |
Xuduudaha farsamada guud:
| Nadiifinta raadadka | Ugu badnaan 0.02mm (450g oo culays ah) | Iska caabinta dahaarka | 100MΩ @500VDC |
| Xasilinta Axial | Ugu badnaan 0.08mm (450g oo culays ah) | Xoogga Dielectric | 500VAC, 1mA, 1s@1KHZ |
| Culeyska ugu badan ee radial | 15N (20mm laga bilaabo dusha sare ee flange) | Fasalka dahaarka | Fasalka B (80K) |
| Culeyska ugu badan ee dhidibka | 5N | Heerkulka deegaanka | -20℃ ~ +50℃ |
Tilmaamaha boolal:
| Dhexroorka boolal-ka hogaanka (mm) | Rasaasta (mm) | Tallaabo (mm) | Dami xoogga is-xiran (N) |
| 3.5 | 0.6096 | 0.003048 | 80 |
| 3.5 | 1 | 0.005 | 40 |
| 3.5 | 2 | 0.01 | 10 |
| 3.5 | 4 | 0.02 | 1 |
| 3.5 | 8 | 0.04 | 0 |
Qalooca soo noqnoqda ee wareegga
Xaaladda tijaabada:
Wadista chopper-ka, kala bar micro-stepping, danab wadista 24V
Meelaha la adeegsado
Daabacaadda 3D:Matoorada stepper-ka isku-dhafan ee 20mm ayaa loo isticmaali karaa xakamaynta dhaqdhaqaaqa daabacayaasha 3D si loo wado nidaamka dhaqdhaqaaqa madaxa daabacaadda, marxaladda iyo axial-ka.
Qalabka otomaatiga ah: Matooradan stepper-ka ah waxaa badanaa loo isticmaalaa qalabka otomaatiga ah, sida mashiinnada baakadaha otomaatiga ah, khadadka isu-imaatinka otomaatiga ah, gacmaha robot-ka ee si otomaatig ah loo maareeyo, iwm., si loo xakameeyo booska saxda ah iyo xawaaraha.
Robot-yada:Dhinaca robotics-ka, matoorrada stepper-ka isku-dhafan ee 20 mm ayaa loo isticmaalaa in lagu xakameeyo dhaqdhaqaaqa wadajirka ah ee robot-yada si loo helo hab-dhaqanka saxda ah iyo xakamaynta booska.
Qalabka mashiinka CNC:Matooradan stepper-ka ah waxaa sidoo kale loo isticmaalaa qalabka mashiinka CNC si loo wado dhaqdhaqaaqyada saxda ah ee qalabka ama miisaska si loogu sameeyo mashiinada saxda ah ee sare.
Qalabka caafimaadka:Qalabka caafimaadka, matoorrada stepper-ka isku-dhafan ee 20mm ayaa loo isticmaali karaa in si sax ah loogu xakameeyo dhaqdhaqaaqa qaybaha qalabka caafimaadka, sida robot-yada qalliinka iyo nidaamyada keenista daawada.
Qalabka baabuurta:Warshadaha baabuurta, matooradan stepper-ka ah waxaa loo isticmaali karaa in lagu xakameeyo booska iyo dhaqdhaqaaqa qaybaha baabuurta, sida nidaamyada kor u qaadista iyo hoos u dhigista daaqadaha, nidaamyada hagaajinta kuraasta, iwm.
Guri Caqli badan:Goobta guriga ee casriga ah, matoorrada stepper-ka ee 20mm isku-dhafan ayaa loo isticmaali karaa in lagu xakameeyo furitaanka iyo xidhitaanka daahyada, kamaradaha wareegaya ee nidaamyada amniga guriga, iwm.
Kuwani waa qaar ka mid ah meelaha caadiga ah ee lagu isticmaalo matoorada stepper-ka isku-dhafan ee 20mm, dhab ahaantii, matoorada stepper-ku waxay leeyihiin codsiyo kala duwan oo warshado iyo goobo kala duwan ah. Xaaladaha isticmaalka gaarka ah waxay sidoo kale ku xiran yihiin qeexitaankooda gaarka ah, waxqabadka iyo shuruudaha xakamaynta.
Faa'iidada
Saxnaanta iyo Awoodda Meelaynta:Matoorada stepper-ka isku dhafan waxay bixiyaan saxnaan sare iyo awood meelayn dhaqdhaqaaqyo talaabooyin fiican leh, badanaa leh xagal talaabasho oo hooseeya sida 1.8 digrii ama 0.9 digrii, taasoo keenta xakameyn boos oo sax ah.
Xuddunta sare iyo xawaaraha sare:Matoorada stepper-ka isku dhafan waxaa loogu talagalay qaab dhismeed ahaan inay bixiyaan wax soo saar xoog leh, iyo darawalka iyo koontaroolaha saxda ah, xawaare sare. Tani waxay ka dhigaysaa kuwo ku habboon codsiyada u baahan labadaba wareegga sare iyo dhaqdhaqaaqa xawaaraha sare.
Xakamaynta iyo Barnaamijaynta:Matoorada stepper-ka isku dhafan waa nidaam xakameyn furan oo leh xakameyn wanaagsan. Waxaa si sax ah u xakameyn kara tallaabo kasta oo dhaqaaq ah oo uu qaado koontaroolaha, taasoo keenta taxane dhaqdhaqaaq oo aad loo barnaamijin karo oo la xakameyn karo.
Darawalka Fudud iyo Xakamaynta:Matoorada stepper-ka isku dhafan waxay leeyihiin wareeg wadista iyo xakamaynta oo fudud marka loo eego noocyada kale ee matoorada. Uma baahna isticmaalka aaladaha jawaab celinta booska (tusaale ahaan kuwa wax lagu qoro) waxaana si toos ah u xakameyn kara darawalada iyo koontaroolayaasha ku habboon. Tani waxay fududeyneysaa naqshadeynta iyo rakibidda nidaamka waxayna yareyneysaa kharashyada.
Kalsooni sare iyo xasillooni:Matoorada stepper-ka isku dhafan waxay bixiyaan isku halayn iyo xasillooni sare sababtoo ah qaab-dhismeedkooda fudud, tiro yar oo qaybo dhaqaaqa ah iyo naqshad aan burush lahayn. Uma baahna dayactir joogto ah, waxay leeyihiin cimri dheer oo adeeg ah, waxayna bixiyaan waxqabad deggan oo leh isticmaal habboon iyo hawlgal.
Tamarta hufan iyo buuq yar:Matoorada stepper-ka isku dhafan waa kuwo tamar fiican leh, iyagoo bixiya xoog wax soo saar sare leh oo leh awood hoose. Intaa waxaa dheer, waxay caadi ahaan u shaqeeyaan si ay u soo saaraan heerarka buuqa oo hooseeya, taasoo siinaysa faa'iido codsiyada xasaasiga u ah buuqa.
Shuruudaha Xulashada Matoorka:
► Jihada dhaqdhaqaaqa/kor u qaadista
► Shuruudaha Xamuulka
► Shuruudaha Stroke
► Shuruudaha mashiinka dhammeeya
► Shuruudaha Saxnaanta
► Shuruudaha Jawaab celinta Encoder-ka
► Shuruudaha Hagaajinta Gacanta
► Shuruudaha Deegaanka
Aqoon-is-weydaarsi wax soo saar
Noo soo dir fariintaada:
Qaybaha alaabta
-
Nema 34 (86mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...
-
Nema 23 (57mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...
-
Nema 8 (20mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4-...
-
Nema 17 (42mm) matoorka stepper-ka isku-dhafan, laba-cirifood, 4...
-
Matoorka stepper-ka isku-dhafan ee Nema 14 (35mm), laba-cirifood, 4...